Repair Manual MAN-00190
THAR CRDe BS-IV MAY 2012/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part or whole of the present
document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of
Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution© 2012 Mahindra & Mahindra Ltd.
Oil filter removal & refitting --
Remove the right side wheel apron.
Remove the oil filter using the MST 545
CAUTION:
• After removal, ensure that the central stud is fully tight.
• It can work out loose while removal of the filter.
• If it has worked loose then tighten it to torque of 25-30 Nm ( 18-22 Lbft)
• While fitting the new oil filter. Apply oil on the “O” rings.
• Tighten by hand only.
To Next Page
Loading...
