Repair Manual MAN-00190
THAR CRDe BS-IV MAY 2012/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part or whole of the present
document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of
Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution© 2012 Mahindra & Mahindra Ltd.
Technical Specifications
Description Value
Turbocharger Model K 04
Turbocharger Type K0 3-0088 M&M (k 03 2070)
Turbo Energy Ltd (TEL), Chennai.
Air velocity between the Air filter compressor inlet
Air velocity between the compressor outlet and the
Maximum static back pressure at downstream of
turbine
60 mbar
Oil pressure at upstream of turbocharger 2.5 bar
Description of system (e.g Charge pressure@max.
power and torque,speed, wastegate, if applicable.)
Max Charge Pressure 100(+0/-20) kPa with
Waste Gate Control
Box Type Aluminium Casting
Identification No./ Part no. M&M part No:0302CC0050N
Air filter
Make M.N Rama Rao & Co. Pvt Ltd, India
Type Foam Type.
Identification No./ Part no. Part no: 0313AM0350N
Inter cooler
Make Visteon India, Chennai, India.
Identification mark / Part No. Part number: 03040G0130N
Air pressure drop across the intercooler Max.100 mbar
Torque Specification
Bolt location Torque in Nm ( Lbft)
Turbocharger Mounting stud/ nut
25 ± 3 Nm( 18.4 ± 2 lbf-ft)
Inlet manifold
25 ± 3 (18.4 ± 2 lbf-ft )
Air cleaner top cover bolts 4.5 Nm (3 lbf-ft)
To Next Page
Loading...
