© Copyright Mahindra and Mahindra Ltd. 052016
10-11
Manual Climate Control
To set the HVAC system to fresh air mode, press the re-circulation
mode button again. The LED on this button switches OFF, indicating
that re-circulation mode is active.
10.9 Rear AC
The rear AC provides cooling for the third row AC vents. Adjust the
temperature control dial as per the temperature requirement. LED
on the button indicates the status.
The rear AC can be switched ON only when the AC button
(front/second row AC) is ON.
10.10 Auto Mode (Automatic Climate Control only)
The auto mode can be used to control the complete air conditioning
operation of the vehicle automatically. The auto mode controls
blower fan speeds, air intake mode, temperature and modes (vents)
based on the set temperature.
HEATING, VENTILATION AND AIR-CONDITIONING SYSTEM (HVAC)
To Next Page
Loading...
