EasyManua.ls Logo

Mahindra XUV 500 - Checking;Topping Engine Coolant Level

Mahindra XUV 500
261 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© Copyright Mahindra and Mahindra Ltd. 052016
14-9
Wipe the dipstick with a clean cloth. Insert the dipstick fully, then
remove it again
If the oil level is between
Min and Max marks, the oil level is
acceptable.
DO NOT ADD OIL
If the oil level is below the Min mark, add enough oil through the
oil filler cap to raise the level within the “Min” and “Max” marks.
Wait for few minutes after every top up for the oil to settle down
before checking the level.
Oil levels above the “Max” mark may cause engine damage/poor
performance.
Put the dipstick and the oil filler cap back and ensure it is fully/
properly seated.
W22P02
To avoid possible oil loss and injury due to hot blow-by gas, DO
NOT operate the vehicle with the engine oil level dipstick and/or
the engine oil filler cap removed.
Draining/Changing of engine oil should always be done by an
Authorized Mahindra Dealer.
14.5.5 Checking/Topping Engine Coolant Level
Park the vehicle on flat-horizontal surface. Keep the parking
brake fully engaged. Shut-off the engine
MAINTENANCE

Table of Contents

Other manuals for Mahindra XUV 500

Related product manuals