2-10
© Copyright Mahindra and Mahindra Ltd.052016
Fuses
Fuse No. Circuit
Fuse Rating
1
— —
2
— —
3
— —
4
— —
5
— —
6 TIRE 5A
2.5 Flat Tire
In case of a flat tyre during driving, reduce your speed gradually,
keeping a straight line. Move cautiously off the road to a safe place
well away from traffic. Park on a level spot with firm ground. Stop
the engine and turn ON your hazard warning flashers.
Firmly apply the parking brake. Have everyone come out of the
vehicle on the side away from traffic.
Never stop your vehicle in a traffic lane to change a tire. You
could be hit by an oncoming vehicle. Keep driving until you reach
a safe location.
Lifting a vehicle to change a tyre or perform maintenance is very
dangerous if you do not have the requisite tools, safety equipment
and training. The jack provided along with the vehicle is to be used
only for changing a spare tire. It is never to be used to perform any
other maintenance or repair on the vehicle.
Never place any part of your body under any portion of the
vehicle when it is supported only by the jack. You could be
crushed by the vehicle if it falls off a jack. Keep by-standers
away from the vehicle.
Find level, solid ground that is clear of oncoming traffic. If you
cannot find a safe place to stop, it is better to drive on a flat tyre
and damage the rim than it is to risk being hit by oncoming traffic.
After changing a flat tire, never store the tyre or other equipment in
the passenger compartment of the vehicle. This loose equipment
could strike an occupant in the event of a sudden stop or collision.
Store all of these items in the proper place.
The following sections outline the procedure for changing a flat tire;
GENERAL
To Next Page
Loading...
