8-30
© Copyright Mahindra and Mahindra Ltd. 012019
• Usually turn the head or tail lights on or off manually
• Turn on the headlamps when passing through a dark area
such as a tunnel
• On a gloomy day, do not rely on this automatic function. But
turn the head or tail lights on or off manually
• When the switch is turned to the “AUTO” position, room, tail,
and head lights might blink for a very short time. It is a
normal phenomenon recognising the automatic setting
88..1122..55 HHeeaadd LLaammpp OONN
Rotate the outer rotary switch on the lighting control stalk
clockwise aligning the “arrow” on the stalk to the “2nd detente”
position on the switch to switch ON the head lamps.
88..1122..66 HHeeaadd LLaammpp LLooww //HHiigghh BB eeaamm
Switch ON the head lamp, and push the lighting control stalk down
(away) from steering wheel to switch ON the head lamp high beam
or lift/pull the lighting control stalk up towards the steering wheel
to switch ON the head lamp low beam. In head lamp high beam, the
high beam tell-tale lamp in the instrument cluster illuminates
indicating high beam option selected.
A : Low Beam
B : High Beam
88..1122..77 HHeeaadd LLaammpp FFllaasshh
FFEEAATTUURREESS AANNDD CCOONNTTRROOLL
To Next Page
Loading...
