Mahindra XUV300 W6 - Page 147

© Copyright Mahindra and Mahindra Ltd. 012019
8-39
Rotate the outer rotary switch on the wiper control stalk to align
the “arrow” on the stalk to the rear wipe “ON” position to operate
the rear wiper in low mode. In this mode, the wiper operates on
preset intervals of 6 seconds.
88..1133..1111 RReeaarr WWiippeerr--HHiigghh MMooddee
Rotate the outer rotary switch on the wiper control stalk to align
the “arrow” on the stalk to the rear wipe “ON” position to operate
the rear wiper continuously .
88..1133..1122 RReeaarr WWaasshh
The rear windshield wash & wipe operates 3 to 4 times or as long
as the stalk end is turned/rotated to the rear wash position.
Wiping will continue for few secs. after releasing the stalk end
switch.
If you switch OFF the ignition before switching OFF the wiper,
the blades stop at random on the windshield. Switch ON the
ignition and move wiper stalk to 'MIST' position to return the
wipers to the park position, provided the wiper stalk is in OFF
position.
FFEEAATTUURREESS AANNDD CCOONNTTRROOLL