EasyManua.ls Logo

Mahindra XUV300 W6 - Page 249

Mahindra XUV300 W6
308 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© Copyright Mahindra and Mahindra Ltd. 012019
14-17
Cruise control is designed to operate above a vehicle speed of
35 kmph for all gears except 1st and reverse gears. The cruise
lamp in the instrument cluster functions only if the cruise
control is active.
CCrruuiissee ccoonnttrrooll wwiillll ffuunnccttiioonn oonnllyy uunnddeerr tthhee ffoolllloowwiinngg ccoonnddiittiioonnss::
The vehicle is cruising above 35 kmph
Engine RPM above 1200 or above 1500
Clutch pedal released
Brake pedal released
Cruise is activated first time in an ignition cycle by SET + button
Subsequent cruise engagements can be done by RESUME SET+
buttons in the same ignition cycle
CCrruuiissee ccoonnttrrooll iiss ddeeaaccttiivvaatteedd uunnddeerr tthhee ffoolllloowwiinngg ccoonnddiittiioonnss::
CRUISE OFF button is pressed
Brake or clutch pedal depressed
If the vehicle speed exceeds the cruise set speed by 30 kmph by
accelerator pedal intervention
If vehicle speed is increased by 10 kmph for more than 30 secs.
by pressing the accelerator pedal
When Set +/Set- switch is pressed for more than 12 secs. (In
this case, vehicle will not go into cruise mode in that ignition
cycle. In order to restore the cruise function, switch OFF the
ignition, wait for 30 secs. and switch ON the ignition)
Cruise influencing error not indicated by Check Engine Lamp,
OBD lamp, etc.
1144..1122..11 CCrruuiissee CCoonnttrrooll AAccttiivvaattiioonn
Drive the vehicle to the desired cruising speed (any value greater
than 35 kmph), press and hold the SET + button until the cruise
lamp in the instrument cluster illuminates.
If cruise is deactivated (e. g. by depressing brake to handle an
intervention in the road etc.) in current driving cycle, reactivate the
Cruise to the last active Cruise Speed by pressing the RESUME
button.
Cruise control may not hold the set speed when you are going up or
down hills, and the vehicle may come out of cruise control. This is
indicated by the cruise lamp going OFF in the instrument cluster.
1144..1122..22 CCrruuiissee CCoonnttrrooll DDee--aaccttiivvaattiioonn
You can cancel cruise control in any of the following ways:
Press the CRUISE OFF button in the steering wheel
Press the brake pedal
SSTTAARRTTIINNGG AANNDD DDRRIIVVIINNGG TTHHEE VVEEHHIICCLLEE

Related product manuals