EasyManua.ls Logo

Mahindra XUV500 2012 - Before Starting the Vehicle

Mahindra XUV500 2012
334 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
STARTING YOUR VEHICLE
© Copyright Mahindra & Mahindra Ltd. v062012 199
11
START - This position is to start the engine by cranking the
starter motor. This is a momentary position. When the key is
turned to start position, the starter cranks the engine. Once
the engine is running, release the key, and the key reverts
back to ON position and the starter motor disengages from
the engine.
CAUTION
Do not continue cranking after the engine has started.
This will lead to damage of the starter and other
engine components.
NOTICE
If turning the key is difficult, jiggle the steering wheel
from side to side and try again.
NOTICE
The key can be removed only in the LOCK position.
When the key is removed, the steering column lock is
activated and the steering wheel cannot be turned.
WARNING
!
Never return the key to the LOCK position or try to
remove the key, when the vehicle is in motion.
Removing the key allows the steering wheel to lock.
You will loose the control of the vehicle and may cause
serious accident. Remove the key only when the
vehicle is parked.
Before Starting the Vehicle
Make sure all vehicle occupants are properly seated in their
seats and have buckled their safety seat belts. For more
information on seat, headrest positioning, seat belts and their
proper usage, refer to the “Seat Belts” section in this manual.
Pedals
A Accelerator Pedal C Clutch Pedal
B Brake Pedal D Dead Pedal
AB
C
D

Table of Contents

Related product manuals