MAINTENANCE
© Copyright Mahindra & Mahindra Ltd. v062012 309
16
Fuses & Relays
A fuse is the most common electric protection device. A fuse
is placed in an electrical circuit, so that when current flow
exceeds the rating of the fuse it blows off.
The element in the fuse melts, opening the circuit and
preventing other components of the circuit from being
damaged by the over current. The size of the metal fuse
element determines the rating. Once a fuse blows off, it must
be replaced with a new one.
Switch the ignition and all electrical equipment OFF before
touching or attempting to change a fuse.
CAUTION
Fit replacement fuse with the same rating as the one
you have removed.
NOTICE
You can identify a blown fuse by a break in the
filament. All fuses except high current fuses are a
push fit. A fuse puller should be used to remove the
fuse from its position.
WEIGHTS
Kerb weight with 90% fuel (with
spare wheel, tools, etc) kg
1785±15 for FWD and 1860±15 for AWD
Maximum GVW kg 2450
Technical Specifications
GOOD BLOWN FUSE PULLER
To Next Page
Loading...
