© 2012 Mahindra & Mahindra Ltd. All rights reserved. This book may not be reproduced or copied, in whole or in
part, without the written permission of Mahindra & Mahindra Ltd.
Good Workshop Practices
Attire/Dress
• Always wear clean uniform
• Wear safety shoes
• Wear gloves, when required
• Wear belt cover
Vehicle Protection
• Put seat cover, fender cover, steering wheel cover, before starting the operations.
Safety
• When working with 2 or more persons, be sure to check safety for one another
• When working with engine running, make sure to provide ventilation for exhaust
fumes in the workshop
• If working on high temperature, high pressure, rotating, moving or vibrating parts,
you should wear appropriate safety gear and take extra care not to injure yourself or
others.
• When jacking up the vehicle, be sure to support the specified location with a safety
stand.
• When lifting up the vehicle, use appropriate safety equipment.
Parts and tools
• Before starting operation, prepare tool stand, MST, Gauges, oils and parts for
replacement.
Removed Parts
• Place removed parts in a separate box to avoid mixing them up with new parts or
contaminating new parts.
• For non-reusable parts such as gaskets, O-rings, and self-locking nuts, replace them
with new ones as instructed in the manual
• Retain the removed parts for customer inspection, if requested.
To Next Page
Loading...
