Maintenance Manual MAN-00167
XYLO mHawk February 2012/ Rev1
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra
Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution © 2012 Mahindra & Mahindra Ltd.
712-MAT-0036 : 0.20 hrs
HVAC FILTER – CLEAN
Open the Glove box assembly
Remove the Glove box stay supports
Remove the HVAC filter tray by opening the snap
clips on both sides.
air is used, ensure the pressure is low). If the filter
tray found very dusty it can be cleaned using soap
solution and water. D
pressure air before refitting.
Installation –
Installation process is reverse to the removal.
Clean mesh every 10000kms
Check the entire system for leaks and recharge if required
To Next Page
Loading...
