Mahindra XYLO mHawk - Body Mounting Bolts - Tighten

Maintenance Manual MAN-00167
XYLO mHawk February 2012/ Rev1
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra
Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution © 2012 Mahindra & Mahindra Ltd.
712-MAT-0039 : 0.40 hrs
BODY MOUNTING BOLTS - TIGHTEN
Nut/ Bolt description
Spanner Size
Quantity Nos.
Torque Value – Nm.
•
Body mtg. bolts
13 mm.
08 nos.
65 ± 05 Nm.
NOTE:
 Body mounts/ triggers on front both are denominated as LH1 & RH1.
 Front mounts LH1 & RH1 are smaller in size/ Dia. than rear.
 Refer above sketch for body mount location.
 Park the vehicle in inspection pit /2 post lift/ 4 post lift.

Body mounts to be checked and torque tighten first at 5000 kms then 20000 kms and then at
every 20000 kms.
Page 63