1
Mahr GmbH, MarSurf PS 10
Order no. Last modification Version
3763315 05/25/2016 Valid from software version 1.00-11
For detailed technical data, please see
data sheet 3763438.
For the declaration of conformity, please
see the last page of the volume.
Information about open source software
Some of the components contained in the soft-
ware used in this product by Mahr GmbH are
licensed as open source software (OSS).
Mahr GmbH accepts no liability for the parts of
the open source software not used in this prod-
uct. The copyright for such parts is held by one
or more authors.
To read the versions and licenses of the OSS
packages contained in the software: Tap on
Licenses in the menu of the MarSurf PS 10.
You can request the source text of the open
source software contained in this product from
Mahr GmbH. Please send an email to info@
mahr.com stating the product name and version.
We will send you the source text of the open
source software subject to a fee which covers
the costs of the data carrier, processing and post-
age.
The following symbols are used in these
operating instructions:
General information.
Caution. Failure to follow instructions
marked with this symbol may cause in-
accurate results and damage equipment.
Warning. Risk of injury or death. Must be
observed!
Contents
Information about
open source software ................................ 1
Permitted uses ............................................ 2
Reasonably foreseeable misuse ........... 2
Disposal ......................................................... 2
Safety instructions .................................... 3
1 Functions .........................................4
2 Operating elements ....................6
3 Getting started .............................7
4 Setting up the
measuring station ........................9
5 Adjusting the settings ..............11
5.1 Entering customer-specific data
in the measuring record .................................15
5.2 Transferring measuring results
by MarCom software .......................................16
6 Maintenance, cleaning
and transport ..............................17
6.1 Checking the integrated standard ..........18
6.2 Replacing the battery ......................................19
6.3 Installing software updates ..........................19
7 Package contents ...................... 20
8 Accessories,
spare and wear parts ................21