Operating Instructions MA 41
8100456_OI_MA41_EN_15a 38 8100456-8 04/15
7.2 Set Printer Settings
Select the printer by turning the left or right level control (1) down. The color
mode is automatically adjusted. If the color mode is wrong adjust the color
mode as well. Jump to the field paper format by pressing the stimulus presenter
bar several times and select A4 or Letter format by using the level controls. If
the printer is connected to your Ethernet network select Ethernet as port.
Additionally, the IP address of the printer needs to be entered in the field “IP
Address.” Select the number of the IP address by rotating the level controls and
press the STORE button to enter the selected number.
Save the settings and return to the user menu by pressing the functional button
OK (7).
Test your printer settings by a sample print before starting the audiological
assessment. Incorrect settings may require a restart of the device.
Enter the field clinic name by using the STIM button. Select letters by rotating
the level control and enter the selected letter by pressing the STORE button (3).
Save the settings and return to the user menu by pressing the functional button
OK (7).
Figure 16 - Printer Settings
To Next Page
Loading...
Need help?
General
