Patient Management
The Patient Management enables storing the results of the audiological tests
on the SD memory card. The results can be loaded later to be reviewed,
edited or printed. The patients can be stored by numbers or by entering name
and birthdate. The demographic patient information can be entered by the
level control (1) or a connected USB keyboard.
Enter the User Menu by pressing the Menu button (19) in the tone or speech
audiometry screen. Press the button Patients (15) to display the patient list.
Figure 16 - Patient List
Select a patient by the level control (1) and press the Stim button (2) to display
the stored sessions. Select a session and press the PDF button (11) to store the
PDF on the SD memory card or USB flash drive. To print the results to a
connected printer press Print (13). The patient information will only be
included on the printout if it is done in the patient list, or if the PDF is created
in the patient list screen.
Current results can be stored to a numbered patient or to a named patient.
Entering the Patient List, a new numbered patient with a new number is
selected automatically. Just press the Save button (9) to save the current
session to this new patient number. To save the results to an existing patient,
select a patient by the level controls and press the Save button (9).
To save the current results to a new patient with a new patient name, press
the button New Patient (15) and a screen appears to enter the patients last
name, first name, ID, and date of birth.
To Next Page
Loading...
Need help?
General
