Appendix C: EMC Compatibility
Portable and Mobile RF communications equipment can affect the MAICO
MA 42. Install and operate the MAICO MA 42 according to the EMC
information presented on this page and the next 4 pages.
The MAICO MA 42 has been tested for EMC emissions and immunity as a
standalone instrument. Do not use the MAICO MA 42 adjacent to or
stacked with other electronic equipment. If adjacent or stacked use is
necessary, the user should verify normal operation in the configuration.
The use of accessories, transducers and cables other than those specified,
with the exception of servicing parts sold by MAICO as replacement parts
for internal components, may result in increased EMISSIONS or decreased
IMMUNITY of the device. Anyone connecting additional equipment is
responsible for making sure the system complies with the IEC 60601-1-2
standard.
Anyone connecting additional equipment is responsible for making sure the
system complies with the IEC 60601-1-2 standard.
Electromagnetic Compatibility
Although the instrument fulfils the relevant EMC
requirements precautions should be taken to avoid
unnecessary exposure to electromagnetic fields, e.g.
from mobile phones, etc. If the device is used
adjacent to other equipment it must be observed
that no mutual disturbance appears.
Although the instrument fulfils the relevant EMC requirements precautions
should be taken to avoid unnecessary exposure to electromagnetic fields,
e.g. from mobile phones, etc. If the device is used adjacent to other
equipment it must be observed that no mutual disturbance appears.