Maidesite Standing Desk - Install Control Panel; Install Adapter and Fixture

Tighten the Adapter and fixture to the table top with ST5*0.8*16 screws
(installation position), as shown in the picture
STEP 7: Install the Adapter and Fixture
STEP 6: Install the Control Panel
P8
H.
G.
5
ST5*0.8*16
Tapping Screw
× 2
Philips screwdriver
8
×1
Hardware List
5
ST5*0.8*16
Tapping Screw
× 2
Philips screwdriver
8
×1
Hardware List
Tighten the
2 screws