Main Access iSTEP - Step-by-Step Assembly Guide; Initial Riser and Tread Assembly

For Questions Regarding Installation, Please Contact Main Access Customer Service 1-888-333-1134
Step 3: Repeat steps 1 & 2 on the right side of the
step.
Step 4: Align the holes on the lower left riser with
the mushroom caps on the lower step tread.
Model #200601T
Step 1: Align the holes on upper left riser with with
mushroom caps on the upper step tread.
Step 2: Snap into place with a rubber mallet.
Step 6: Repeat steps 4 & 5 on the right side of the
step.
Step 5: Snap mushroom caps into place using
rubber mallet.