Main Access Smart Choice Ladder - Page 4

Step 11: Use pliers to tighten all Hex Nuts.
Step 12: Insert Adjustable Support Tubes into the
Support Tube Base.
SMART CHOICE LADDER
Model #200700T Assmebly Instructions
Step 7: Insert the Ladder Foot Extension into the
end of the Outisde Ladder Body.
Step 8: Place 3/8" x 4" Carriage Bolts through the
Outside Ladder Body and Ladder Foot Extension.
Step 9: Place 3/8" Flat Washers and Hex Nuts over
the Carriage Bolts.
Step 10: Repeat steps 8 & 9 on opposite side.