5
ASSEMBLY INSTRUCTIONS
NOTE: Please follow the instructions carefully to ensure a safe and sturdy bed. Do not fully
tighten the bolts until all rails and guardrails are attached.
1. Unpack the units and confirm that you have all hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Attach one Cross Assembly (E) to the long post of Back Ladder (B) with two 5/8” Bolts (2).
1/4" x 5/8” Bolt
(2 used in this step)
②
E
B
2
E
B
To Next Page
Loading...
