15
Display Brightness
Set the radio display screen to your desired brightness - you can
do this in working mode or standby. To change the brightness,
press the ‘Standby/Dimmer’ button repeatedly to view the
multiple levels of brightness.
System Reset
To perform a reset of the radio and to erase all settings made on
the unit, ensure that the radio is in working mode.
Then press and hold the ‘Mode’ button (Ref.) for 3 seconds and
the display will show “Press enter key to reset”. If you want to
continue with the reset then press ‘Enter’ (Ref.).
SW Version – Software Version Display
In working mode, press and hold the ‘Info’ (Ref.) button for 1
second and this will display the software version.
Instrucons Guide
To Next Page
Loading...
