5
Instrucons Guide
Press and hold the ‘Standby/Dimmer’ button (Ref.) to turn
the radio on. To select DAB mode, press the ‘Mode’ button
repeatedly until “DAB” appears on the display screen.
Fully extend the antenna (Ref.) to ensure that you receive the
best signal.
To begin searching for available stations, perform an auto scan
by pressing the ‘Scan’ button (Ref.) and then releasing. This will
start scanning up the frequency band and store all stations that
have a good signal.
The radio will now begin to search for available station and will
automatically save all the stations with a strong signal. After
searching has nished, it will automatically play the rst station
stored.
To browse through all of the stations that have been stored, use
the ‘Next’ (Ref.) and ‘Prev’ (Ref.) buttons to scroll through
the stations. To select a station to play, ‘Enter’ button (Ref.) to
conrm your selection.
When you power up the radio again after switching o, it will
automatically tune to the same station (DAB+ or FM) that was
last selected.
DAB/DAB+ Radio