Recordings
Folder view & Wallpaper
Create a voice recording
1. To create a voice recording, follow these steps:
2. Select ‘Start voice recording’
3. The device will begin to record by using the built-in microphone
4. Once you have finished your recording, press the ‘Enter’ button to pause/
stop (Ref.1). Press the ‘Back’ button then select ‘Yes’ or ‘No’ to save or delete
the recording.
Options
Start voice recording-select to begin a voice recording.
Record format -select to choose the format of your recordings (MP3 file or WAV
file).
Record Settings-select to choose the recorder settings. Bitrate settings enable
you to change the recording bitrate between 512, 768, 1024, and 1536kbps
(Kilobits per second). VOX-mode refers to voice mode. When VOX mode is
switched on, the device will only record when the microphone detects a voice, and
pause when it does not detect a voice.
Recordings library-select to view a list of your recordings
Folder view
View all files
Select ‘Folder view’ from the main menu to view a list of all files on the device
(audio files). The device name will display on your computer as ‘MajorityMP3’.
To Next Page
Loading...