Makita 446 L - Product Tests and Approvals; Technical Specifications Overview; List of Available Accessories

MAKITA 446 L
12
english
9.3 Tests and approvals
The vacuum cleaners have
been tested as specified in IEC/
EN 60335-2-69 including ap-
pendix AA. All the requirements
were fulfilled for equipment in
dust class L.
The vacuum cleaners must be
inspected regularly in accord-
ance with national accident
prevention regulations (in Ger-
many as specified in VBG 4 and
DIN VDE 0701 Part 1 and Part
3, at regular intervals and after
repairs or modifications).
A dust test must be performed
at least once every year by
the manufacturer or a trained
person. This test covers,
for example, whether there
is damage to the filter, the
vacuum cleaner is sealed to
the air and the control equip-
ment works properly.
9.4 Technical data
9.5 Accessories
Designation Order No.
Filter bags (pack of 5) W 302 000 565
Filter element W 302 001
490
Filter screen W 15475
Foam STOP (6 x 1l) W 8469
Disposal bags (pack of 5) W 302 001 310
Suction hose, antistatic, ø27 mm x 3.5 m W 15325
MAKITA 446 L
EU AU CH GB 110 V GB 230 V
Voltage Volt 230 240 230 110 230-240
Mains frequency Hz 50/60
Power consumption Watt (HP) 1200 1000
Connected load for appliance
socket
Watt (HP) 2400 1200 1100 1750 2000
Total connected load/fuse Watt (HP)/A 3600/16 2400/10 2300/10 2750/25 3000/13
Volume flow (air) l/min (cfm) 3600 (127) 3100 (109)
Vacuum mbar/kPa (in) 230/23 (93)
Sound pressure level at a
distance of 1 m, ISO 3744
dB(A) 62
Sound level dB(A) 59
Power cord length m 7.5
Power cord type H07RN-F 3G1,5 mm²
H07BQ-F
3G2,5 mm²
H07RN-F
3G1,5 mm²
Protection class I
Type of protection (splash
water protected)
IP X4
Radio interference suppression
level
EN 55014-1
Tank volume l (UKgal, USgal) 27 (5.9, 7)
Width mm (in) 380 (15)
Depth mm (in) 390 (15.5)
Height mm (in) 570 (22.5)
Weight kg (lb) 10 (22)