Need help?Do you have a question about the Makita BO5030 and is the answer not in the manual?
General| Power | 300 W |
|---|---|
| Uncertainty K | 1.5 m/s² |
| Vibration emission | 4.5 m/s² |
| Dust container type | Dust bag |
| Sound pressure level | 80 dB |
| Sound level uncertainty | 3 dB |
| Oscillating orbit diameter | 2.8 mm |
| Idle oscillation rate (max) | 12000 OPM |
| Type of sander | Orbital sander |
| Dust extraction port | Yes |
| Power source | AC |
| AC input voltage | 110-240 V |
Weight and Dimensions| Depth | 153 mm |
|---|---|
| Width | 123 mm |
| Weight | 1300 g |
| Sanding disc diameter | 125 mm |
Explanation of symbols used for the equipment and safety notes.
Details on the tool's intended applications and electrical power requirements.
Typical noise and vibration levels for BO5030 and BO5031 models.
Ensures safety in the work environment and during electrical connection and use.
Guidelines for operator alertness, protective equipment, and preventing unintentional starting.
Instructions on proper usage, maintenance, and care of the power tool.
Crucial safety advice specific to operating this random orbit sander.
How to operate the power switch ('I' for ON, 'O' for OFF).
Details on the speed dial for infinite adjustment on BO5031 model.
Procedure for attaching and detaching abrasive discs to the pad.
Instructions for attaching the dust bag to the tool.
Steps for safely removing and emptying the dust bag.
Guidance on correctly installing the paper dust bag.
Procedure for fitting the paper filter bag.
Guidance on performing sanding operations safely and effectively.
Information on tool maintenance, repairs, and recommended accessories.
To Next Page
