Makita DCL182 - Cleaning Without Nozzle; Cleaner Body and Filter Maintenance

12 ENGLISH
Cleaning without nozzle
Youcanpickuppowderanddustwithoutnozzle.
MAINTENANCE
CAUTION:
• Alwaysbesurethatthetoolisswitchedo󰀨
before attempting to perform inspection or
maintenance.
After use
NOTE:
• Putting the cleaner against the wall without any
other support cause the cleaner to fall down and
be damaged.
Cleaning
Fromtimetotimewipeo󰀨theoutside(cleanerbody)of
the cleaner using a cloth dampened in soapy water.
Clean out also the suction opening, dust bag/paper
pack mounting area and the dust stopper.
CAUTION:
• Neverusegasoline,benzine,thinner,alcohol
or the like. Discoloration, deformation or cracks
may result.
Wash the dust bag in soapy water when it is clogged
with dust and the cleaner power becomes small. Dry it
outthoroughlybeforeuse.Aninsu󰀩cientlydriedbag
may cause poor suction and shorten the service life of
the motor.
NOTE:
• Paper pack is a throw-away type.
Whenthespongelteriscloggedwithdust,removeit
fromthecleanerandthenwipeito󰀨orwashinwater.