Makita DCL182 - Troubleshooting Common Issues

13 ENGLISH
Removing and installing the sponge lter
1
►1.Spongelter
Toremovethespongelter,removethedustbagor
paper pack and then pinch and take it out.
1
►1. Recessed wall
Pressinthewholeedgeofthespongelteragainstthe
recessed wall inside the dust bag/paper pack mounting area.
CAUTION:
• Aftercleaningspongelter,besuretoinstall
it on the cleaner. If washed in water, dry it up
beforeinstalling.Aninsu󰀩cientlydriedsponge
ltermayshortentheservicelifeofthemotor.
Wall mount for cordless cleaner
Optional accessory
NOTE: The screw to mount the holder is not included.
Prepareascrewwhichtswiththematerialtoscrew
into.
Attach the wall mount for cordless cleaner to a hard
wooden wall, beam or column, where the wall mount
forcordlesscleanercanbermlysecured.Alwaysbe
sure that the wall mount for cordless cleaner is securely
attached before hanging the cleaner.
1
►1. Wall mount for cordless cleaner
CAUTION: Do not hang the cleaner to the wall
mount violently or hang other appliances than the
cleaner.
Things to Check Before Asking for Repairs
Symptom
Weak suction
power
Not working
Area to be investigated
Is the battery cartridge discharged ?
Fixing method
Empty dust bag or paper pack.
Dust down or wash the dust
bag.
Replace paper pack.
Charge the battery cartridge.
Charge the battery cartridge.
Is dust bag or paper pack full of dust ?
Is the battery cartridge discharged ?
Is dust bag clogged ?
Is paper pack clogged ?
NOTE:
• Do not attempt to repair cleaner by yourself.
TomaintainproductSAFETYandRELIABILITY,repairs,anyothermaintenanceoradjustmentshouldbeperformed
byMakitaAuthorizedorFactoryServiceCenters,alwaysusingMakitareplacementparts.