Makita DCL182 - Installation Procedures; Installing Dust Bag

8 ENGLISH
CAUTION:
• When closing the front cover, be careful not to
pinchyourngers.
1
►1. Dust stopper
2. Pull out both the orange-colored dust stopper and
dust bag together at the same time.
1
►1. Dust stopper
3. Remove the dust stopper and empty the cleaner.
Dust bag and paper pack
Install either dust bag or paper pack before using
cleaner.
Use the dust stopper when installing either dust bag or
paper pack.
The dust bag can be used repeatedly by cleaning it out.
Paper pack is a throw-away type. Throw away the entire
paper pack without emptying when it has become full.
Installing dust bag
1
2
►1. Upper side of dust stopper 2. Lower side of dust
stopper
Use the dust stopper when installing dust bag. Be
careful not to take the upper side for the lower side by
mistakebecausetheyaredi󰀨erenteachother.
1
2
3
►1. Dust stopper 2. Groove 3. Dust bag
1. Insert the protrusion of the dust bag into the
grooveintheduststopperasshowninthegure.
1
►1. Lower groove
2. There is no distinction between the upper and
lower sides of the dust bag. You may insert its
protrusion of any side into the lower groove of the
dust stopper.