USEOO1-1
Specific Safety Rules
1.
Hold tool
by
insulated gripping surfaces when performing an operation where
the cutting tools may contact hidden wiring or its own cord. Contact with
a
"live" wire will make exposed metal parts
of
the tool "live" and shock the
operator.
Be sure no one is below when using
the
tool in high locations.
2.
Always be sure you have a firm footing.
3.
Hold
the
tool firmly.
4.
Keep hands away from rotating parts.
5.
Do
not leave
the
tool running. Operate the tool only when hand-held.
6.
Do
not touch the drill bit or the workpiece immediately after operation; they
may be extremely hot and could burn your skin.
SAVE
THESE
INSTRUCTIONS.
4
To Next Page
Loading...
Need help?
General
