Makita EA3501S - Starter System and Fan Housing; Replacing Starter System Components

37
Extract from the spare parts list
Use only original MAKITA parts. For repairs and
replacement of other parts, see your MAKITA service centre.
EA3500S, 3501S
EA3502S, 3503S
Pos. Qty. Denomination
1 442 030 661 1 Sprocket nose bar 3/8”, 30 cm, 1,3 mm (12”)
442 035 661 1 Sprocket nose bar 3/8”, 35 cm, 1,3 mm (14”)
442 040 661 1 Sprocket nose bar 3/8”, 40 cm, 1,3 mm (16”)
2 531 492 646 1 Saw chain 3/8” for 30 cm, 1,3 mm
531 492 652 1 Saw chain 3/8” for 35 cm, 1,3 mm
531 492 656 1 Saw chain 3/8” for 40 cm, 1,3 mm
1 442 030 611 1 Sprocket nose bar 3/8”, 30 cm, 1,1 mm (12”)
442 035 611 1 Sprocket nose bar 3/8”, 35 cm, 1,1 mm (14”)
2 531 290 046 1 Saw chain 3/8” for 30 cm, 1,1 mm
531 290 052 1 Saw chain 3/8” for 35 cm, 1,1 mm
1 442 030 061 1 Sprocket nose bar 3/8”, 30 cm, 1,3 mm (12”)
442 035 061 1 Sprocket nose bar 3/8”, 35 cm, 1,3 mm (14”)
442 040 061 1 Sprocket nose bar 3/8”, 40 cm, 1,3 mm (16”)
2 531 492 646 1 Saw chain 3/8” for 30 cm, 1,3 mm
531 492 652 1 Saw chain 3/8” for 35 cm, 1,3 mm
531 492 656 1 Saw chain 3/8” for 40 cm, 1,3 mm
1 442 030 211 1 Sprocket nose bar 3/8”, 30 cm, 1,1 mm (12”)
442 035 211 1 Sprocket nose bar 3/8”, 35 cm, 1,1 mm (14”)
2 531 290 046 1 Saw chain 3/8” for 30 cm, 1,1 mm
531 290 052 1 Saw chain 3/8” for 35 cm, 1,1 mm
3 952 010 630 1 Chain protector for 30-35 cm (3/8”)
952 010 640 1 Chain protector for 40 cm (3/8”)
4 941 713 160 1 Universal wrench SW 16/13
6 944 340 001 1 Carburetor screwdriver
7 320 163 447 1 Suction head
8 181 114 202 1 Fuel tank cap, cpl.
9 963 229 036 1 O-Ring 29,3 x 3,6 mm
10 195 160 050 1 Return spring pack, complete
11 195 160 030 1 Spring
12 195 160 020 1 Driver
13 195 160 060 1 Starter cable 3,5x900 mm
14 965 603 030 1 Spark plug
15 181 114 202 1 Oil tank cap, cpl.
16 963 229 036 1 O-Ring 29,3 x 3,6 mm
17 125 173 010 1 Air Þ lter
18 165 213 600 1 Sprocket guard, cpl.
125 213 660 1 Sprocket guard (with fast tensioner), complete
19 185 232 020 2 Hexagonal nut M8
20 170 223 111 1 Clutch drum cpl. 3/8“, 6-tooth
21 900 006 065 1 Cup washer
22 927 306 000 1 Circlip
Accessories (not delivered with the chain saw)
25 953 100 090 1 Chain gauge (492)
25 953 100 290 1 Chain gauge (290)
26 953 004 010 1 File handle
27 953 003 100 1 Round Þ le, dia. 4,5 mm
28 953 003 090 1 Round Þ le, dia. 4,0 mm
29 953 003 060 1 Flat Þ le
30 953 030 020 1 File holder
(with round Þ le dia. 4,5 mm)
31 953 030 010 1 File holder
(with round Þ le dia. 4,0 mm)
32 940 827 000 1 Offset screwdriver
- 949 000 035 1 Combined can
(for 5l fuel, 2.5l chain oil)