Need help?Do you have a question about the Makita EG SERIES and is the answer not in the manual?
Manual instructions for proper product disposal and local regulations.
Indicates the user should read the operation manual for guidance.
General warning symbols related to operation and safety precautions.
Symbols related to environmental protection and personal safety.
Warning symbol indicating electrical hazards or safety precautions.
Indicates the noise level (LwA) of the generator in decibels (dB).
Explains the meaning and location of the CE conformity mark on the product.
Data on the measured sound power levels for different generator models.
Data on the guaranteed sound power levels for different generator models.
Outlines the procedure used for conformity assessment.
Lists harmonized standards referenced for product compliance.
Important safety warnings regarding potential serious injury or death.
Warning about keeping flammable materials away from the generator.
Warning against operating the generator in enclosed or poorly ventilated areas.
Caution against placing the generator in enclosed niches or covering it.
Instruction to operate the generator on a horizontal surface to prevent damage.
Safety advice concerning generator cords and extension cables.
Lists and illustrates the main components of the generator models.
Procedure for checking and topping up engine oil before operation.
Instructions for checking the fuel level in the tank.
Guidance on inspecting the fuel filter and fuel tank cap.
Pre-operation checks for leaks, loose parts, and wiring.
Step-by-step guide for starting the generator engine, including choke use.
Guidelines for connecting AC appliances, checking voltage and load capacity.
Instructions for using the DC output for charging 12V batteries.
Steps for disassembling the spark arrester for cleaning or replacement.
Instructions for cleaning the spark arrester screen to maintain performance.
Detailed steps for draining, refilling, and checking engine oil.
Procedure for cleaning and maintaining the air filter element.
Steps for inspecting, cleaning, and adjusting the spark plug gap.
Instructions for cleaning the fuel strainer to ensure clean fuel supply.
How to check the condition and length of carbon brushes.
To Next Page
General
