Repair
[1] NECESSARY REPAIRING TOOLS
[2] LUBRICATIONS
Fig. 1
17
24
Code No.
Apply the following lubricants to protect parts and product from unusual abrasion.
Description Use for
1R004 Retaining ring pliers ST-2 Removing / mounting Retaining ring S-8
1R045 Gear extractor (large) Removing Armature from Bracket
1R263 Bearing extractor Removing Knob cover
1R269 Bearing extractor (small) Removing Ball bearings
1R346 Center attachment Using with 1R045
Item No. Description Portion to lubricate Lubricant Amount
a little
17 Cam plate
24 Front base complete
The surface where Knob contacts
(a) Cylindric portion where Main frame contacts
(b) Thread portion
(a)
(b)
Knob
Main frame
complete
Rubber plate
CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.
Remove the blades before repair.
Makita grease N No.2
VG100
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Poly V-belt 4-241
DISASSEMBLING
Fig. 2 Fig. 3
M4x16 Pan
head screw
Remove M4x16 Pan head screw and separate Belt cover from Main frame complete.
Cut Poly V-belt 4-241 with nippers when it has damaged. (Fig. 2)
Note: When replacing Armature, Drum and V Pulleys and reusing Poly V-belt 4-241,
Lever up Poly V-belt 4-241 with screwdriver while turning V pulley 4-37 as illustrated in Fig. 3.
Poly V-belt can be removed without cutting.
Belt cover
V pulley 4-37
Poly V-belt 4-241
Main frame
complete
P 2/ 8
To Next Page
Loading...
