9 ENGLISH
1
2
3
4
5
6
7
8
9
10
11
12
1 Hole for padlock 2 Switch trigger 3 Lock-o button 4 Carry handle
5 Battery cartridge 6 Dust extraction hose 7 Left bevel angle scale 8 Pointer (for left bevel
angle)
9 Releasing lever (for 48°
bevel angle)
10 45° adjusting bolt (for left
bevel angle)
11 Shaft lock 12 Dust bag (when replaced
with dust extraction
hose)
INSTALLATION
Bench mounting
WARNING: Ensure that the tool does not
move on the supporting surface. Movement of the
miter saw on the supporting surface while cutting may
result in loss of control and serious personal injury.
1. Fix the base to a level and stable surface, screw-
ing with the bolts. This helps to prevent from tipping and
possible injury.
128.5 mm
100 mm
128.5 mm
100 mm
181 mm
181 mm
1
2
(5-1/16″)
(3-15/16″)
(5-1/16″)
(7-1/8″)
(7-1/8″)
► 1. Bolt 2. Mounting hole
To Next Page
Loading...
