Need help?Do you have a question about the Makita M0801B and is the answer not in the manual?
Steps for removing and installing the 13mm drill chuck assembly.
Steps for removing and installing the 10mm drill chuck assembly.
Procedures for disassembling and assembling helical gear and ball bearing.
Procedures for disassembling and assembling cam complete and change lever.
Steps for removing and installing the 13mm drill chuck assembly.
Steps for removing and installing the 10mm drill chuck assembly.
Procedures for disassembling and assembling helical gear and ball bearing.
Procedures for disassembling and assembling cam complete and change lever.
General| Type | Impact Drill |
|---|---|
| Voltage | 220V |
| Chuck Capacity | 1.5 - 13 mm |
| Drilling Capacity (Concrete) | 13 mm |
| Drilling Capacity (Steel) | 13 mm |
| Power Supply Cord | 2.0 m |
| Chuck Size | 13mm |
| No Load Speed | 0-2800 RPM |
| Impacts per Minute | 0-44800 IPM |
To Next Page
