To Next PageTo Next Page
Need help?Do you have a question about the Makita M18 FUEL 2744-20 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Battery Platform | M18 |
| Depth Adjustment | Yes |
| Fastener Type | 18 Gauge Brad Nails |
| Fastener Length | 5/8" - 2-1/8" |
| Magazine Capacity | 110 nails |
| Operating Modes | Sequential and contact actuation |
| Power Source | Cordless |
| Battery Compatibility | M18 |
| Warranty | 3-year limited warranty |
Guidelines for maintaining a safe and clear workspace to prevent accidents.
Precautions for safe use of power tools related to electrical hazards.
Essential personal protective measures for tool operators.
Explanation of symbols used in the operator's manual.
Procedure for loading and unloading nails into the magazine.
How to adjust the depth at which fasteners are driven into material.
Steps to safely remove jammed fasteners from the tool.
Procedure to reset the striker after a jam or low battery condition.
Daily checks to ensure the tool operates safely and correctly.
Instructions for cleaning the tool to remove dust and debris.
Information on where and how to get the tool repaired.
Information on recommended accessories for the tool.
Contact details for service and support in the USA.
Contact details for service and support in Canada.
Details of the limited warranty for products sold in USA and Canada.
Details of the limited warranty for products sold in Mexico, Central America, and Caribbean.
