Makita M1901 - Tool Maintenance and Service; Carbon Brush Replacement Procedure; Professional Servicing Recommendations

10 ENGLISH
1
2
Fig.23
►1. Chip cover or Nozzle 2. Screwdriver
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
1
2
Fig.24
►1. Brush holder cap 2. Screwdriver
To maintain product SAFETY and RELIABILITY,
repairs,anyothermaintenanceoradjustmentshould
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.