Makita ML104 User Manual

3
ENGLISH
Parts description
SPECIFICATIONS
• Due to our ongoing research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
• Operating time may differ depending on battery type and usage condition.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
IMPORTANT SAFETY
INSTRUCTIONS
WARNING:
When using electric luminaires, basic safety precautions
should always be followed to reduce the risk of fire,
electric shock, and personal injury, including the following:
READ ALL INSTRUCTIONS.
1. Before using battery cartridge, read all instructions
and cautionary markings on (1) battery charger, (2)
battery, and (3) product using battery.
2. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
3. Use a power source with the voltage specified on the
nameplate of the charger.
4. Do not attempt to use a step-up transformer, an
engine generator or DC power receptacle.
5. Charge the battery cartridge with room temperature at
10°C - 40°C (50°F - 104°F).
Let a hot battery cartridge cool down before charging
it.
6. When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may cause
sparks, burns, or a fire.
7. After charging or before attempting any maintenance
or cleaning, unplug the charger from the power
source.
8. Do not touch the inside of the flashlight head with
tweezers, metal tools, etc.
9. Under abusive conditions, liquid may be ejected from
the battery, avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
10. Do not short the battery cartridge:
(1) Do not touch the terminals with any conductive
material.
(2) Avoid storing battery cartridge in a container with
other metal objects such as nails, coins, etc.
(3) Do not expose battery cartridge to water or rain.
A battery short can cause a large current flow,
overheating, possible burns and even a breakdown.
11. If electrolyte gets into your eyes, rinse them out with
clear water and seek medical attention right away. It
may result in loss of your eyesight.
12. Be careful not to drop or strike battery.
1. Battery cartridge
2. Battery release button
3. Red indicator
4. Indicator lamps
5. Check button
6. Light switch
7. Main LED (20 pcs.)
8. Sub LED (1 pc.)
9. Metal hook
10. USB power supply switch
11. USB power supply port
12. Hole
Model
ML104
Major Features
Voltage DC 10.8 V -12 V max
LED
Main LED 0.5 W x 20 pcs.
Sub LED 2.0 W x 1 pc.
USB power supply
Port USB A type
Output voltage DC 5 V
Output current 2.1 A
Operating time
(approximately)
Standard battery
cartridge
Main LED (20 pcs.)
when lit
Main LED (5 pcs.)
when lit
Sub LED (1 pc.)
when lit
BL1016 2.0 hours 6.5 hours 7.0 hours
BL1021B 2.5 hours 8.5 hours 9.5 hours
BL1041B 5.5 hours 17 hours 19 hours
Dimensions
(with BL1041B)
with the hook stood L 414 mm (16-1/4”) x W 66 mm (2-5/8”) x H 132 mm (5-3/16”)
with the hook stored L 360 mm (14-1/8”) x W 66 mm (2-5/8”) x H 101 mm (4”)
Net Weight 0.61 - 0.78 kg (1.4 - 1.7 lbs)

Makita ML104 Specifications

General

Quantity per pack	1 pc(s)