Need help?Do you have a question about the Makita VJ04 and is the answer not in the manual?
General| Brand | Makita |
|---|---|
| Model | VJ04 |
| Category | Cordless Saw |
| Language | English |
Ensures a safe working environment by keeping the area clean and well-lit, avoiding hazardous atmospheres.
Provides guidelines for electrical safety, including matching plugs to outlets and avoiding wet conditions.
Emphasizes staying alert, using personal protective equipment, and maintaining proper footing and balance.
Covers proper tool usage, checks for damage, blade sharpness, and ensuring correct accessories are used.
Instructions for charging, using, and storing battery packs safely to prevent hazards like fire or injury.
Guidelines for professional servicing, lubrication, and keeping tool handles dry and clean.
Secure workpiece, avoid nails, check clearance, hold tool firmly, and ensure blade is not contacting workpiece.
Ensure blade stop before removal, avoid no-load operation, keep hands away from moving parts.
Wear safety glasses, be aware of hot parts after operation, use appropriate dust masks.
Read all instructions, do not disassemble battery cartridge, stop operation if time is excessively shorter.
Avoid short circuits, water exposure, physical damage, and electrolyte contact with eyes or skin.
Store batteries at appropriate temperatures, do not incinerate, and avoid dropping or striking.
Follow dangerous goods legislation requirements for lithium-ion batteries during transport.
Charge before full discharge, avoid overcharging, and charge at room temperature.
Tool automatically cuts off power when overloaded to prevent damage and extend battery life.
Tool stops operation when battery voltage is too low, requiring recharge.
For cutting mild steel, stainless steel, and plastics.
For clean cuts in wood and plywood.
For cutting mild steel, aluminum, and hardwood.
For fast cutting in wood and plywood.
Explains the function of the lock-off button and how to operate the switch trigger for starting and stopping.
Hold base flush with workpiece and advance tool slowly for curves to prevent breakage.
Instructions for tilting the base to make bevel cuts between 0° and 45°.
Pre-drill a hole of 12 mm or more for internal cutouts without a lead-in cut.
Use rip fence for fast, clean straight cuts on widths up to 160 mm.
Install rip fence for cutting circles or arcs of 170 mm radius or less.
To Next Page
