Makita XCV13 Series - Installing the water filter; Installing the paper pack

11 ENGLISH
3. Mount the damper on the powder lter and then
place them in the prelter with aligning the mounting
position markings.
4. Finally, mount the tank cover and lock it.
1
2
3
4
5
6
6
6
► 1. Tank cover 2. Powder lter (HEPA) 3. Damper
4. Prelter 5. Tank 6. Mounting position marking
NOTICE: Before using the powder lter, make
sure that prelter and damper are always used
together. It is not allowed to install powder lter
solely.
Installing the water lter
Optional accessory for cloth lter model
CAUTION: Never pick up water or wet dust
without the oat and the cloth lter or the water
lter.
CAUTION: For picking up wet dust, make
sure that the oat cage and the oat are installed
on the cleaner.
CAUTION: When installing the water lter on
the tank, set it tight at the opening of the tank so
that the hook of the water lter engages the tank
opening rmly and there is no space between the
water lter and the tank.
To pick up water or wet dust only, the water lter is more
suitable than the cloth lter.
When installing the water lter, align its mounting posi-
tion mark with the one on the tank.
1
2
3
3
► 1. Water lter 2. Tank 3. Mounting position marking
NOTE: It is recommended using water lter when
picking up large amount of water repeatedly.
Otherwise vacuum ability may be reduced in case of
cloth lter.
Installing the paper pack
Optional accessory
WARNING: When using the paper pack, also
use the cloth lter or prelter together that is
preinstalled on the cleaner. Failure to use the cloth
lter / prelter together may cause unusual noise and
heat, resulting in a re.
CAUTION: (For the cloth lter model)
•
Never pick up water or other liquids or wet
dusts when using the paper pack. Picking up
such things may cause the paper pack breakage.
• Before using the paper pack, make sure that
powder lter (optional accessory), damper
(optional accessory) and prelter are always
used together.
CAUTION: (For the powder lter model)
• Before using the paper pack, make sure
that powder lter, damper and prelter are
always used together.
1. Remove the rubber holder.
1
1
► 1. Rubber holder