Makita XCV13 Series - Storage of accessories; Cleaning of cloth filter; Cleaning of powder filter (HEPA) and prefilter

14 ENGLISH
Storage of accessories
The pipes can be placed into the pipe holder when not
using the cleaner for a short time.
The hose can be stored around the tool by connecting
each ends.
Cleaning of cloth lter
Only for the cloth lter model
Clogged cloth lter causes poor suction performance.
Clean out the cloth lter from time to time.
To remove dust or particles adhering to the cloth lter,
shake the frame bottom quickly several times.
1
► 1. Cloth lter
Cleaning of powder lter (HEPA) and
prelter
Only for the powder lter model
Clogged powder lter, prelter and damper cause poor
suction performance. Clean out the lters and dampers
from time to time.
To remove dust or particles adhering to the lters, shake
the frame bottom quickly several times.
Occasionally wash the powder lter in water, rinse and
dry thoroughly in the shade before use. Never wash
lters in a washing machine.
NOTE: Do not rub or scratch the powder lter, the
prelter or the damper with hard objects such as a
brush and a paddle.
NOTE: The lters wear out in course of time. It is
recommended to have some spares for them.