EN
Ladies and Gentlemen, thank you for purchasing our product!
Before starting to use, please read the following instructions
for the correct use of the product. Please keep these instructions on
future and to follow its recommendations, as non-compliance may endanger life or health.
Important: KEEP FOR FUTURE REFERENCE!
-Please read it completely before use and follow all instructions in the manual.
-Do not use the product if any part is missing or damaged.
-Please keep this manual for future reference.
Specification:
1. metal / plastic material
2. external dimensions: 11.5x9.5x4 cm
3. internal dimensions: 10 x 7 x 2.5 cm
4. weight: 0.292 kg
Included:
- Safe
- Mounting kit
How to open the key box:
1. Slide the curtain to reveal the shields.
2. Set the dials to the current combination - (the factory combination is 0-0-0-0).
3. Press the switch to open the safe.
4. After locking the safe, set the switches to secure the combination.
5. Close the curtain.
Legend:
1. Shield
2. Switch
3. The veil
4. "RESET" button
5. Cover
How to set up your combination:
1. Open the key box, leave the shields in the current combination - (the factory combination is 0-0-0-0).
2. Press the RESET button from position A to position B as shown in fig. 2.
3. Now use the switches to set the desired combination, as in fig. 1.
4. Press the RESET button back to position A. - Now the new combination is set.
5. Close the curtain.
Warnings:
1. To ensure water resistance, keep the curtain closed.
2. It is recommended that the dials be changed weekly to keep them running well.
Wall mounting instructions:
1. Open the safe - there will be 5 holes in the back.
2. Hold the safe on the wall and mark the positions of the holes with a pencil.
3. Use a drill to drill holes in the wall.
4. Place the plastic wall plugs in the wall.
5. Attach the safe to the wall with screws.
To Next Page
Loading...