- The machine is making a strange noise.
Remove the tank ( ) and check that water flows when you push the valve.
Refit the tank ( ) and check that it is in the required position.
If the tank ( ), contains water, the machine may need descaling. If descaling does not
solve the problem with the machine, a technical incident has occurred. Please contact
the Malongo after-sales service on the number provided in the "Troubleshooting" chapter,
to organise a repair and/or replacement.
COFFEE POURING IS SLOW
- The machine is making the usual noises.
Check that the handle is fully closed ( ).
Check that the water or coee are not pouring into the pod basket ( ).
- The machine is making a strange noise.
Remove the tank ( ) and check that water flows when you push the
valve
Refit the tank ( ) and check that it is in the required position.
LEAKS UNDER THE MACHINE
- Check that the tank ( ) is in position.
The upper hook is in its housing.
The end-piece is inserted in the machine slot.
The part is fully inserted.
- Check that the strainer ( ) is not full.
Remove the pod basket ( ).
Remove the strainer ( ) and empty if necessary.
TROUBLESHOOTING
If you were unable to solve your problem using the "Quick repair guide", you can contact
your distributor and our teams will be delighted to help and find a quick solution.
6
6
6
1
7
6
6
6
9
7
9
25
NoticeEoh-4Trads-FRENESIT-MAJ092021.qxp_Mise en page 1 29/09/2021 16:52 Page 26