17
TO REMOVE THE COFFEE UNIT:
TO REFIT THE COFFEE UNIT:
TO REFIT THE MACHINE COVER:
Check that the coffee unit is in the open
position (vertical lateral slots) and locked
in (grey catch clipped upwards – see
above procedure to ret the coffee unit).
Raise the handle (no. 2) to maximum,
while pressing the two silver-plated handle
discs simultaneously, bring the cover (no.
1) over the coffee unit, align the cover (no.
1) with the machine) and push the cover
(no. 1) downwards until the two silver-
plated discs are clipped in position. It is
now impossible to raise the cover (no. 1)
upwards.
To Next Page
Loading...
