Mamiya 6MF - Loading the Film; Film Roll and Take-up Spool Setup

[Memo clip]
The memo clip on the back cover is used to
1.
hold the film box to serve as a convenient
Push the spool release lever of right side
reminder of the type of film in the camera or
to the right, and install the take-up spool in
for recording the date.
the take-up
spool chamber, then push the
lower spool stud up.
2. Like installing the take-up spool, push
the spool release lever of left side to the left.
place a
roll of film in the film chamber, mak-
ing sure it seats properly. Make sure the
backing paper is in the
position illustrated
above.
1616