The exposure compensator functions in a
number
of
important ways. It can be used to
correct
exposure
values
(EVs)
or
the
differ-
ences in brightness between a primary sub-
ject and its background -especially when
over or under-exposures occur. It can
also
be used when filters are employed or when
engaged in available light photography
-
or under high contrast conditions (i.e.
low or
high key).
To set, press the compensator lock release
button
(A). and
move
lever
(B)
to select
the
When taking an exposure longer than
desired EV: graduations are 1/3 EV.
4 seconds. set
shutter
to
“B”
(bulb). While
fhe button is pressed down, the shutter will
[When a filter is used]
Whether using the AE or manual mode
sim-
ply compensate for the filter exposure factor
as indicated in the table below.
remain open. In order to prevent camera
movement, it is best to use a cable release
and tripod.
When set at “B” the self-timer does not
work.
26
To Next Page
Loading...
