MAN B&W S65ME-C8.2-GI-TII User Manual

MAN B&W 16.01
Page 9 of 10
MAN Diesel
198 85 31-0.2MAN B&W ME/ME-C/-GI TII engines
Remote Control system
The remote control system normally has two alter-
native control stations:
• the bridge control
• the engine control room control.
The remote control system is to be delivered by a
supplier approved by MAN Diesel & Turbo.
Bridge control systems from suppliers approved
by MAN Diesel & Turbo are available. The Extent
of Delivery lists the following options:
• for Fixed Pitch propeller plants, e.g.:
4 95 703 Lyngsø Marine
4 95 704 Mitsui Zosen Systems Research
4 95 705 Nabtesco
4 95 715 Kongsberg Maritime
• and for Controllable Pitch propeller plants, e.g.:
4 95 701 Lyngsø Marine
4 95 716 Kongsberg Maritime
4 95 719 MAN Alphatronic.
Power Management System
The system handles the supply of electrical power
onboard, i. e. the starting and stopping of the gen-
erating sets as well as the activation / deactivation
of the main engine Shaft Generator (SG), if fitted.
The normal function involves starting, synchro-
nising, phasingin, transfer of electrical load and
stopping of the generators based on the electrical
load of the grid on board.
The activation / deactivation of the SG is to be
done within the engine speed range which fulfils
the specified limits of the electrical frequency.
Auxiliary equipment system
The input signals for ‘Auxiliary system ready’ are
given partly through the Remote Control system
based on the status for:
• fuel oil system
• lube oil system
• cooling water systems
and partly from the ECS itself:
• turning gear disengaged
• main starting valve ‘open’
• control air valve for sealing air ‘open’
• control air valve for air spring ‘open’
• auxiliary blowers running
• hydraulic power supply ready.
Monitoring systems
In addition to the PMI Auto-tuning system, which
is part of the ME engine installation, CoCoSEDS
can be used for in-depth monitoring of the engine.
A description of the systems can be found in
Chapter 18 of this Project Guide.
Instrumentation
Chapter 18 in the Project Guide for the specific
engine type includes lists of instrumentation for:
• The CoCoSEDS system
• The class requirements and MAN Diesel &
Turbo’s requirements for alarms, slow down and
shut down for Unattended Machinery Spaces.

MAN B&W S65ME-C8.2-GI-TII Specifications

General

Brand	MAN B&W
Model	S65ME-C8.2-GI-TII
Category	Engine
Language	English