MAN B&W 19.06
Page 1 of 2
MAN Diesel
MAN B&W 98-60ME-GI engines 198 83 274.6
GI cylinder cover, plate 2272-0300 (901 and more)
1 Cylinder cover with extra holes for gas equip-
ment and Inconel cladding. Incl. of fuel, exhaust
and starting valves, indicator valve and sealing
rings (disassembled)
½ set Studs for 1 cylinder cover
Gas Pipe Supply Chain, plate 4272-2800 (901 and more)
1 set Double-wall fuel gas pipes for 1 cylinder
1 set Repair kit for high-pressure gas pipes incl. gas-
kets and packings
Piston and piston rod, plates 2272-0400/0420/0500 (902)
1 Piston complete (with cooling pipe), piston rod,
piston rings and stuffing box, studs and nuts
Piston rings, plate 2272-0420 (902)
1 set Piston rings for 1 cylinder
Cylinder liner, plate 2272-0600 (903)
1 Cylinder liner incl. of sealing rings and gaskets
Cylinder lubricating oil system, plates 3072-0600,
6670-0100 (903)
1
)
1 set Spares for lubricating oil system for 1 cylinder
2 Lubricator backup cable
Connecting rod, and crosshead bearing, plates 1472-0300,
2572-0300/0200 (904)
1 Telescopic pipe with bushing for 1 cylinder
1 Crankpin bearing shells in 2/2 with studs and nuts
1 Crosshead bearing shell lower part with studs
and nuts
2 Thrust pieces
Thrust block, plate 2572-0600 (905)
1 set Thrust pads for ‘ahead’
For NK also one set ‘astern’ if different from
‘ahead’
HPS Hydraulic Power Supply, plates 4572-1000/0750,
4572-1100/1200/1250 (906)
1 and 2
)
1 Proportional valve for hydraulic pumps
1 Leak indicator
1 Safety coupling for hydraulic pump
1 Accumulator
6 Chain links. Only for ABS, LR and NK
1 set Flex pipes, one of each size
Engine control system, plates 4772-1500, 7072-0800/1100
(906)
2
)
1 Multi Purpose Controller
1 Amplifier for Auxiliary Control Unit
1 Position Amplifier
1
Trigger sensor for tacho system, only if trigger ring
1 Marker sensor for tacho system
1 Tacho signal amplifier
1 IDkey
1 Encoder
1 Fuse kit
Starting valve, plates 3472-0200/0250 (907)
1 Starting valve, complete
1 Solenoid valve
1
)
Hydraulic cylinder unit, plates 4572-0500/0100, 4272-0500
(906, 907)
1 and 2
)
1 Fuel booster barrel, complete with plunger
1 FIVA valve complete
1 Suction valve complete
1 set Flex pipes, one of each size
1 High-pressure pipe kit
1 Packing kit
Exhaust valve, plates 2272-0200/0210/0230 (908)
2 Exhaust valves complete
(The 2nd exhaust valve is mounted in the Cylin-
der cover complete)
1 Highpressure pipe from actuator to exhaust valve
1 Exhaust valve position sensor
Fuel valve, plates 4272-0200/0100/2300 (909)
1 set Fuel valves of each size and type fitted, com-
plete with all fittings, for one engine
a) engines with one or two fuel valves: one set of
fuel valves for all cylinders on the engine
b) engines with three and more fuel valves per
cylinder: two fuel valves complete per cylinder,
and a sufficient number of valve parts, excluding
the body, to form, with those fitted in the com-
plete valve, a full engine set
1 set Highpressure pipe, from fuel oil pressure
booster to fuel valve
1 set Gas injection valve incl. sealings
List of Spare Parts, Unrestricted Service
Fig. 19.06.01a: List of spare parts, unrestricted service: 4 87 601
Spare parts are requested by the following Classes
only: GL, KR, NK and RS, while just recommended by:
ABS and LR, but neither requested nor recommended
by: BV, CCS, DNV and RINA.
To Next Page
Loading...
Need help?
General
