MAN B&W 19.10
Page 1 of 2
MAN Diesel
MAN B&W S65ME-C8-GI 198 89 18-2.1
List of Standard Tools for Maintenance
The engine is delivered with all necessary special tools for scheduled maintenance. The extent of the tools
is stated below. Most of the tools are arranged on steel plate panels. It is recommended to place them
close to the location where the overhaul is to be carried out, see Section 19.11.
All measurements are for guidance only.
Cylinder Cover, MF/SF 21-9010
1 pcs Tool panel incl. lifting chains, grinding mandrels,
extractor tools etc.
1 pcs Cylinder cover rack
1 set Fixture for tension rig
Cylinder Unit Tools, MF/SF 21-9014
1 pcs Tool panel incl. pressure testing tool, piston ring
expander, stuffing box tools, templates etc.
1 pcs Guide ring for piston
1 pcs Lifting tool for piston
1 pcs Support iron for piston
1 pcs Crossbar for cylinder liner, piston
1 set Measuring tool for cylinder liner
1 set Test equipment for accumulator
1 pcs ECU temporary backup cable for indicator
1 set Fixture for tension rig
Crosshead and Connection Rod Tools, MF/SF 21-9022
1 pcs Tool panel incl. suspension and lifting tools,
protection in crankcase etc.
1 pcs Crankpin shell, lifting tool
1 pcs Guide shoe extractor
Crankshaft and Thrust Bearing Tools, MF/SF 21-9026
1 pcs Tool panel incl. lifting, testing and retaining
tools etc.
1 pcs Lifting tool for crankshaft
1 pcs Lifting tool for thrust shaft
1 set Feeler gauges
1 pcs Measuring instrument for Axial Vibration Damper
(Only for engines without Axial Vibration Monitor)
1 set
Fixture for tension rig
Control Gear Tools, MF/SF 21-9030
1 pcs Tool panel incl. pin gauges, chain assembly
tools, camshaft tools etc.
1 set Hook wrenches for accumulator
1 pcs Pin gauge for crankshaft
Exhaust Valve Tools, MF/SF 21-9038
1 pcs Tool panel incl. grinding-, lifting-, adjustment-
and test tools etc.
1 set Fixture for tension rig
Gas System Tools, MF/SF 21-9040
1 pcs Tool panel incl. hook wrenches, extractors,
grinding- and lifting tools etc.
1 pcs Tool box for gas system tools
1 set Sealing tools for gas valve
1 set Sealing tools for shutdown valve
1 set Sealing tools for blow-off valve
1 pcs Chisel and guide for gas valve sealing
dismantling
1 set Plugs for leakage search, incl. handle
1 pcs Gas detector
1 pcs Test rig for gas valve
Fuel Oil System Tools, MF/SF 21-9042
1 pcs Tool panel incl. grinding, lifting, adjustment and
assembly tools etc.
1 set Fuel valve nozzle tools
1 set Toolbox for fitting of fuel pump seals
1 pcs Probe light
1 pcs Fixture for tension rig
Fuel valve test rig, MF/SF 21-9043
1 pcs Test rig for fuel valve
Turbocharger System Tools, MF/SF 21-9046
1 set Air cooler cleaning tool
1 set Guide rails, air cooler element
1 pcs Compensator, dismantling tool
1 pcs Travelling trolley
1 set Blanking plates
1 set Fixture for tension rig
To Next Page
Loading...
Need help?
General
