Man D 0826 LOH - Page 510

SERVICE PRODUCTS / SPECIFICATIONS
Application and temperature range Item name / specification Alternative specification
Initial fill service product in bold type.
W
E/BEM - 39
DIESEL ENGINE
Lubrication
.....................
Initial fill...................................
Running-in engine oil M 3291
SAE 10W–40 ............................................
(M 3291 has the same performance
capability as M 3277)
none
Service fill,..............................
Application and temperature
range as well as Euro 0, 1, 2
and 3 – see pages 26/27
Super-high-performance diesel engine oil
to M 3277..................................................
Optionally:
Super-high-performance diesel engine oil
to M 3275..................................................
or
Engine oil to MAN 271 ..............................
ACEA E4
ACEA E3
ACEA E2
In extremely cold
application conditions
......
Down to –32 °C ......................
(use pre-heating system at
temperatures below –32 °C)
Super-high-performance diesel engine oil
to M 3277..................................................
SAE 5W–30, 5W–40
ACEA E4
Cooling
...........................
Cooling system.......................
Antifreeze and anti-corrosion
protection, see page 35
Antifreeze MAN 324..................................
or
anti-corrosion agent MAN 248 .................
+ potable tap water
none
none
Hydrostatic fan drive............... Engine oil
used in diesel engine ................................
Engine oil
used in diesel engine
Fuel
.................................
Winter operation,
see page 29............................ Diesel fuel DIN EN 590.............................
ASTM D 975 No. 1 D
BS 2869 Class A 1
EN 590
ÖNORM EN 590
Air filter
...........................
Oil bath air filter ...................... Engine oil
used in diesel engine ................................
Engine oil
used in diesel engine